조립시스템 입니다.
scsi인지 sas인지 sata인지 이전 관리자가 자료남긴게 없으니 답답하네요. 시스템을 재부팅 할수도 없구요.
sudo apt-get install hwinfo
hwinfo --storage
mbout@mbout-laptop:~$ hwinfo --storage
27: PCI 1f.2: 0106 SATA controller (AHCI 1.0)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_2929
Unique ID: w7Y8.eRgR737FJb7
SysFS ID: /devices/pci0000:00/0000:00:1f.2
SysFS BusID: 0000:00:1f.2
Hardware Class: storage
Model: "Intel ICH9M/M-E SATA AHCI Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2929 "ICH9M/M-E SATA AHCI Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3607
Revision: 0x03
Driver: "ahci"
Driver Modules: "ahci"
I/O Ports: 0x60e8-0x60ef (rw)
I/O Ports: 0x60fc-0x60ff (rw)
I/O Ports: 0x60e0-0x60e7 (rw)
I/O Ports: 0x60f8-0x60fb (rw)
I/O Ports: 0x6020-0x603f (rw)
Memory Range: 0x9a504000-0x9a5047ff (rw,non-prefetchable)
IRQ: 29 (59079 events)
Module Alias: "pci:v00008086d00002929sv0000103Csd00003607bc01sc06i01"
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: "modprobe ahci"
Config Status: cfg=new, avail=yes, need=no, active=unknown
mbout@mbout-laptop:~$