콘키 설치하여 실행하였는데 다음과같은 에러가 뜨네요

Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

위에는 에러 사항이고 아래는 실행파일 내용입니다.

Conky sample configuration

the list of variables has been removed from this file in favour

of keeping the documentation more maintainable.

Check http://conky.sf.net for an up-to-date-list.

set to yes if you want Conky to be forked in the background

background no

X font when Xft is disabled, you can pick one with program xfontsel

#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font mintsmild.se
#font -------34-------*

Use Xft?

use_xft yes

Xft font when Xft is enabled

xftfont Bitstream Vera Sans Mono:size=8

Text alpha when using Xft

xftalpha 0.8

Print everything to stdout?

out_to_console no

MPD host/port

mpd_host localhost

mpd_port 6600

mpd_password tinker_bell

Print everything to console?

out_to_console no

mail spool

mail_spool $MAIL

Update interval in seconds

update_interval 5.0

This is the number of times Conky will update before quitting.

Set to zero to run forever.

total_run_times 0

Create own window instead of using desktop (required in nautilus)

own_window yes

If own_window is yes, you may use type normal, desktop or override

own_window_type normal

Use pseudo transparency with own_window?

own_window_transparent yes

If own_window_transparent is set to no, you can set the background colour here

own_window_colour hotpink

If own_window is yes, these window manager hints may be used

#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

Use double buffering (reduces flicker, may not work for everyone)

double_buffer yes

Minimum size of text area

minimum_size 280 5

Draw shades?

draw_shades yes

Draw outlines?

draw_outline no

Draw borders around text

draw_borders yes

Draw borders around graphs

draw_graph_borders yes

Stippled borders?

stippled_borders 8

border margins

border_margin 4

border width

border_width 1

Default colors and also border colors

default_color white
default_shade_color black
default_outline_color black

Text alignment, other possible values are commented

#alignment top_left
#alignment top_right
alignment bottom_left
#alignment bottom_right
#alignment none

Gap between borders of screen and text

same thing as passing -x at command line

gap_x 12
gap_y 12

Subtract file system buffers from used memory?

no_buffers yes

set to yes if you want all text to be in uppercase

uppercase no

number of cpu samples to average

set to 1 to disable averaging

cpu_avg_samples 2

number of net samples to average

set to 1 to disable averaging

net_avg_samples 2

Force UTF8? note that UTF8 support required XFT

override_utf8_locale no

Add spaces to keep things from moving about? This only affects certain objects.

use_spacer none

Shows the maximum value in scaled graphs.

show_graph_scale no

Shows the time range covered by a graph.

show_graph_range no

Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)

#max_port_monitor_connections 256

Maximum number of special things, e.g. fonts, offsets, aligns, etc.

#max_specials 512

Maximum size of buffer for user text, i.e. below TEXT line.

#max_user_text 16384

Timing interval for music player thread, e.g. mpd, audacious

#music_player_interval (update_interval is default)

Strictness of if_up. One of: up, link or address. The later ones imply the further ones.

Defaults to up.

#if_up_strictness address

variable is given either in format $variable or in ${variable}. Latter

allows characters right after the variable and must be used in network

stuff because of an argument

stuff after ‘TEXT’ will be formatted on screen

TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #cc2222} $cpu% ${cpubar}
${color red}${cpugraph 0000ff 00ff00}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% ${membar}
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 80}Up:${color #22ccff} ${upspeed eth0} k/s
${color #0000ff}${downspeedgraph eth0 32,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph eth0 32,150 0000ff ff0000}
${color lightgrey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
${color #88aadd}MPD: ${alignc}$mpd_artist - $mpd_title
${color #88aadd}$mpd_bar
${color #88aadd}${alignc}$mpd_status
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
$stippled_hr
${color #ddaa00}Port(s)${alignr}#Connections
$color Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768 61000 count}${alignr}ALL: ${tcp_portmon 1 65535 count}
${color #ddaa00}Inbound Connection ${alignr} Local Service/Port$color
${tcp_portmon 1 32767 rhost 0} ${alignr} ${tcp_portmon 1 32767 lservice 0}
${tcp_portmon 1 32767 rhost 1} ${alignr} ${tcp_portmon 1 32767 lservice 1}
${tcp_portmon 1 32767 rhost 2} ${alignr} ${tcp_portmon 1 32767 lservice 2}
${tcp_portmon 1 32767 rhost 3} ${alignr} ${tcp_portmon 1 32767 lservice 3}
${tcp_portmon 1 32767 rhost 4} ${alignr} ${tcp_portmon 1 32767 lservice 4}
${tcp_portmon 1 32767 rhost 5} ${alignr} ${tcp_portmon 1 32767 lservice 5}
${color #ddaa00}Outbound Connection ${alignr} Remote Service/Port$color
${tcp_portmon 32768 61000 rhost 0} ${alignr} ${tcp_portmon 32768 61000 rservice 0}
${tcp_portmon 32768 61000 rhost 1} ${alignr} ${tcp_portmon 32768 61000 rservice 1}
${tcp_portmon 32768 61000 rhost 2} ${alignr} ${tcp_portmon 32768 61000 rservice 2}
${tcp_portmon 32768 61000 rhost 3} ${alignr} ${tcp_portmon 32768 61000 rservice 3}
${tcp_portmon 32768 61000 rhost 4} ${alignr} ${tcp_portmon 32768 61000 rservice 4}
${tcp_portmon 32768 61000 rhost 5} ${alignr} ${tcp_portmon 32768 61000 rservice 5}

[quote="puting":1kmesozx]Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

Conky: MPD error: problems getting a response from "localhost" on port 6600 : Connection refused

위에는 에러 사항이고 아래는 실행파일 내용입니다.

Conky sample configuration

the list of variables has been removed from this file in favour

of keeping the documentation more maintainable.

Check http://conky.sf.net for an up-to-date-list.

set to yes if you want Conky to be forked in the background

background no

X font when Xft is disabled, you can pick one with program xfontsel

#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font mintsmild.se
#font -------34-------*

Use Xft?

use_xft yes

Xft font when Xft is enabled

xftfont Bitstream Vera Sans Mono:size=8

Text alpha when using Xft

xftalpha 0.8

Print everything to stdout?

out_to_console no

[color=#FF0000:1kmesozx]# MPD host/port

mpd_host localhost

mpd_port 6600

mpd_password tinker_bell[/color:1kmesozx]

Print everything to console?

out_to_console no

mail spool

mail_spool $MAIL

Update interval in seconds

update_interval 5.0

This is the number of times Conky will update before quitting.

Set to zero to run forever.

total_run_times 0

Create own window instead of using desktop (required in nautilus)

own_window yes

If own_window is yes, you may use type normal, desktop or override

own_window_type normal

Use pseudo transparency with own_window?

own_window_transparent yes

If own_window_transparent is set to no, you can set the background colour here

own_window_colour hotpink

If own_window is yes, these window manager hints may be used

#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

Use double buffering (reduces flicker, may not work for everyone)

double_buffer yes

Minimum size of text area

minimum_size 280 5

Draw shades?

draw_shades yes

Draw outlines?

draw_outline no

Draw borders around text

draw_borders yes

Draw borders around graphs

draw_graph_borders yes

Stippled borders?

stippled_borders 8

border margins

border_margin 4

border width

border_width 1

Default colors and also border colors

default_color white
default_shade_color black
default_outline_color black

Text alignment, other possible values are commented

#alignment top_left
#alignment top_right
alignment bottom_left
#alignment bottom_right
#alignment none

Gap between borders of screen and text

same thing as passing -x at command line

gap_x 12
gap_y 12

Subtract file system buffers from used memory?

no_buffers yes

set to yes if you want all text to be in uppercase

uppercase no

number of cpu samples to average

set to 1 to disable averaging

cpu_avg_samples 2

number of net samples to average

set to 1 to disable averaging

net_avg_samples 2

Force UTF8? note that UTF8 support required XFT

override_utf8_locale no

Add spaces to keep things from moving about? This only affects certain objects.

use_spacer none

Shows the maximum value in scaled graphs.

show_graph_scale no

Shows the time range covered by a graph.

show_graph_range no

Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)

#max_port_monitor_connections 256

Maximum number of special things, e.g. fonts, offsets, aligns, etc.

#max_specials 512

Maximum size of buffer for user text, i.e. below TEXT line.

#max_user_text 16384

Timing interval for music player thread, e.g. mpd, audacious

#music_player_interval (update_interval is default)

Strictness of if_up. One of: up, link or address. The later ones imply the further ones.

Defaults to up.

#if_up_strictness address

variable is given either in format $variable or in ${variable}. Latter

allows characters right after the variable and must be used in network

stuff because of an argument

stuff after ‘TEXT’ will be formatted on screen

TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #cc2222} $cpu% ${cpubar}
${color red}${cpugraph 0000ff 00ff00}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% ${membar}
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 80}Up:${color #22ccff} ${upspeed eth0} k/s
${color #0000ff}${downspeedgraph eth0 32,150 ff0000 0000ff} ${color #22ccff}${upspeedgraph eth0 32,150 0000ff ff0000}
${color lightgrey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
[color=#FF0000:1kmesozx]${color #88aadd}MPD: ${alignc}$mpd_artist - $mpd_title
${color #88aadd}$mpd_bar
${color #88aadd}${alignc}$mpd_status[/color:1kmesozx]
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
$stippled_hr
${color #ddaa00}Port(s)${alignr}#Connections
$color Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768 61000 count}${alignr}ALL: ${tcp_portmon 1 65535 count}
${color #ddaa00}Inbound Connection ${alignr} Local Service/Port$color
${tcp_portmon 1 32767 rhost 0} ${alignr} ${tcp_portmon 1 32767 lservice 0}
${tcp_portmon 1 32767 rhost 1} ${alignr} ${tcp_portmon 1 32767 lservice 1}
${tcp_portmon 1 32767 rhost 2} ${alignr} ${tcp_portmon 1 32767 lservice 2}
${tcp_portmon 1 32767 rhost 3} ${alignr} ${tcp_portmon 1 32767 lservice 3}
${tcp_portmon 1 32767 rhost 4} ${alignr} ${tcp_portmon 1 32767 lservice 4}
${tcp_portmon 1 32767 rhost 5} ${alignr} ${tcp_portmon 1 32767 lservice 5}
${color #ddaa00}Outbound Connection ${alignr} Remote Service/Port$color
${tcp_portmon 32768 61000 rhost 0} ${alignr} ${tcp_portmon 32768 61000 rservice 0}
${tcp_portmon 32768 61000 rhost 1} ${alignr} ${tcp_portmon 32768 61000 rservice 1}
${tcp_portmon 32768 61000 rhost 2} ${alignr} ${tcp_portmon 32768 61000 rservice 2}
${tcp_portmon 32768 61000 rhost 3} ${alignr} ${tcp_portmon 32768 61000 rservice 3}
${tcp_portmon 32768 61000 rhost 4} ${alignr} ${tcp_portmon 32768 61000 rservice 4}
${tcp_portmon 32768 61000 rhost 5} ${alignr} ${tcp_portmon 32768 61000 rservice 5}[/quote:1kmesozx]

설정을 안해줬는데 mpd를 사용하고있죠??
이걸 설정해줘야 할꺼같습니다 ㅎ

그러니깐 저 맨위에 설정부분을 고치시던지…

맨아래 빨간부분을 삭제해주시면 될듯합니다 ^^
근데 MPD가 뭐죠…?

아… 혹시 그 MPD가 혹시 이건가요…?

viewtopic.php?f=9&t=7744

맞으시다면 ^^ 다음꺼 보시고 설치하신다음 설정방법 보시면서 설정하시면 될듯합니다.

비슷한 용법으로 부산 사투리 중에

[code:kux92wl9]그 아이가 가씨 집안 아이이니?

==>

가가 가가가?
[/code:kux92wl9]
ㅋㅋ

문제는 간단히 해결됐네요… 님말대로 mpd를 못잡아서 그런현상이 …

그래서 시냅스에가서 mpd를 설치하닌깐 문제없이 잘되네요.